flight_information_overview

Runway Maintenance

Runway_960

Runway 10/28 Overlay Works 

Dublin Airport’s main runway 10/28 was officially opened in June 1989.

This runway is an essential  piece of national infrastructure, underpinning the local and national economy. 

Runway 10/28,  which is 2,637m long, has been the workhorse of the airport facilitating over four million aircraft movements since it opened 27 years ago.  This runway has allowed Dublin Airport to grow from five passengers in 1989 to 25 million passengers in 2015.

Last year Dublin Airport had almost 198,000 aircraft movements in total, 95% of these took off or landed on the main runway R10/28, and just 5% of total aircraft movements used runway 16/34.

Like all airport assets, the main runway has been subjected to regular, ongoing maintenance over the years to ensure its safe operation. As a consequence of the growth in movements over the past two years in particular, this runway is now in urgent need of a major overhaul.    The work is required primarily for safety reasons, but also to ensure runway availability for a busy operations schedule.   

This construction work, which is expected to start at the beginning of October, will take place overnight for a period of 15-18 months.

While this work is significant, it is routine maintenance on an aging asset. Work on this runway is extremely challenging for airport operations because it can only be carried out in a narrow time frame at night between the hours of 11pm and 5am.  This runway will then be handed back in time for the early morning first wave of airport operations.

While the night time works are ongoing the airport has no alternative but to use its secondary runway, R16/34 to facilitate landings and takeoffs during this time. 

This runway has two flight paths, the R16 flight path brings aircraft over rural areas of North Dublin while the R34 approach brings aircraft over South Dublin, across Dublin Bay to Clontarf, Artane, Beaumont, Santry before landing at the airport.

The preferred flight path to/from the secondary runway is R16 and the Irish Aviation Authority will use this flight path for the duration of the works. On occasion when the wind direction is an issue, R34 will be used.

Previous repair works on Runway 10/28

 

Dublin Airport’s main runway, R10/28 had similar work carried out over a six month period in 2010 when a thin, porous friction course overlay was applied to extend the runway life by 6-8 years.

The runway was closed at night from 11pm to 5am to facilitate this work and R16/34 was the active runway during this time.

R10/28 was closed again at night for two months in April and May, 2015 for extensive survey works to ascertain the extent of overlay required, again R16/34 was the active runway during this time. 

Because this runway is in urgent need of repair it requires regular ad hoc work and this can only be facilitated at night.

Alternative considered:

Closing runway 10/28 for the duration of the works was considered in order to get this work done more quickly, however this is not an option for two reasons:

  • Secondary runway does not have the capacity to cater for the large volumes of aircraft flying to/from Dublin Airport on a daily basis, and

  • R16/34 cannot be used in low visibility conditions and the airport would have to close if such conditions exist.

Dublin Airports Flight Schedule Between 11pm - 5am:

Runway 10/28 Overlay and Associated Projects

Flight Numbers:

Summer 16* Average No. MVTS/night Winter 16 Average No.MVTS/night 
 23:00 to 00:00  27  23:00 to 00:00  20
 00:00 to 01:00  10  00:00 to 01:00  1
 01:00 to 02:00  2  01:00 to 02:00  0
 02:00 to 03:00  1  02:00 to 03:00  0
 03:00 to 04:00  1  03:00 to 04:00  0
 04:00 to 05:00  4  04:00 to 05:00   4
 Total:   45    25

*Based on Summer Schedule for July 16

Use of R16/34:

Runway 16/34 is just over 2,000 metres long and is Dublin Airport’s secondary runway.

This runway is brought into use when the crosswind component on the main runway reaches 15 knots and is expected to increase over a prolonged period of time.  It is also used when essential maintenance is needed on the main runway.

In the two years from January 2013 to December 2015 R16/34 was used as follows:

  • 3.8% flight path to R16
  • 1.5% flight path to R34

When this runway is in use the Irish Aviation Authority will use R16 as the preferred flight path to/from Dublin Airport.  Only on occasions when the weather conditions are an issue, will the flight path to R34 be activated.

For example the main runway was closed at night for essential maintenance for a two week period recently.  During these works the flight path to R16 was used for the majority of the time with the approach to R34 being used for two nights on Tuesday July 12 and Wednesday July 13 because of the wind direction.